The manufacturing of the busbar system shall comply to the latest edition of BS 158 and BS 159. All busbars and current carrying parts shall be manufactured to carry a current density of not more than 1.55 A/mm² and shall be capable
Read Complete Method
Main Distribution Boards MDB – BLOCKSET The low voltage main distribution boards are Schneider Electric “BLOKSET” range of L.V Switchboards. Blokset switchboards are designed, manufactured and tested in accordance with IEC 60439-1 standards. BLOKSET, a modular multi – functional system has been
Read Complete Method
The switchboards, distribution boards including smbd and control panels are built in accordance with IEC 439 “Factory Built Assemblies for Low Voltage” or BS 5486 “Factory-built Assemblies of Switchgear and Control Gear for Voltage up to and including 1000 AC and 1200V
Read Complete Method
What is Solar Water Heater? A Solar Water Heater is a device which provides hot water for bathing, washing, cleaning, etc. using solar energy. It is generally installed at the terrace or where sunlight is available and heats water during day time
Read Complete Method
The intent of the water heating equipment is to supply hot water to the building in designed location at required time. Hot water heater are both vertical & horizontal types. Normally horizontal water heaters are suitable for ceiling installation and vertical can
Read Complete Method
CCTV Camera system or closed circuit television system is the use of video cameras to transmit a signal to a specific, limited set of monitors and at the same time recording and storing the acquired video streams. It differs from broadcasting on
Read Complete Method
Water filter is used for the removal of suspended particles from the water in order to make it usable or drinkable as well. The major function of a water filter is to pass the water through it and stop the impurities inside
Read Complete Method
General Requirements Batteries, fuel & auxiliary power must be isolated before carrying out initial inspection. Ensure that the control switch is in the OFF position and emergency switch is pressed. Ensure that the panel has the correct fascia and labels. Note: All test
Read Complete Method