Tag Archives: Installation Method Statement

Kitchen Exhaust Ducting Installation Method Statement

This method statement covers on site installation of pre-fabricated ductwork system for kitchen exhaust ducting. Procedure defines the method that will make sure that prefabricated kitchen exhaust ducting including support/bracketing, in line equipment installation and final connections are correct and acceptable, and conforms to the contract documents and specifications. Construction/ Project Manager is overall responsible… Read More »

Method Statement for Temporary Retaining Wall Installation

Temporary-Retaining-Wall-Installation-Method-Statement

The existing ground level varies between + 3.52 m DMD to + 4.29 m DMD. The working platform level for Double U wall is considered at the average ground level. A Double U channel beam wall with one layer of tie-back anchors shoring system is proposed along the four sides of the plot for a… Read More »

Water Spray Firefighting System Installation Method Statement

water spray system installation method statement

Below you can find steps for installing the water spray firefighting and fire suppression system. The method statement covers all necessary parts and accessories for the spray system. Following tools shall be arranged before starting the job: Water Spray Nozzle – High Velocity Deluge Valve, OS & Y Valve Electrical Devices Pipe Wrenches Hammer Chisel… Read More »

Installation Procedure For Closed Control Units

The mechanical site engineer / site supervisor will give necessary instructions to tradesmen (pipe fitters & duct installers) and provide necessary approved construction/shop drawings of latest revision along with coordinated layouts for ccu installation works. Following tools shall be required before starting the CCU installation work: Pipe cutting & threading machines Standard mechanical Tool Box… Read More »

Sanitary Fittings / Sanitary Ware Installation Method Statement

If you need to learn the method for installation of sanitary ware fittings, then you can use step wise procedure as per below method statement. Storage of Sanitary Fittings i) Upon completion of receiving QC inspection, segregate the sanitary ware model / size wise and store accordingly for easy retrieval. ii) Store all items of… Read More »