Construction Documentation Portal
Maximum fall incidents take place due to improper use of scaffolds and ladders especially in construction industry when people are working at height. There are plenty of means used in construction sites for performing the work at height that include rigid stationary
1. Purpose This method statement covers on site installation of thermal insulation for the complete chilled water piping system. 2. Scope This procedure is applicable for insulation of all supply and return mains, headers, branches, risers, drips, run-outs, pump suction and discharge,
You can follow below simple steps for installing the split units on any project. These are general guidelines and can be used to prepare professional method statements for approvals and pre-qualification purposes. Mostly other sections should be included in the documents i.e.
The procedures for the installation and fixing of electric water heater with supports and accessories shall be done as per the manufacturer’s recommended guidelines and installation instructions and as per the approved water supply drawings/layouts and detailed drawing as follows. This method
Below is a comprehensive method statement for GI and PVC conduit installation which can be used for purpose of any project and it can be approved easily by consultants because it covers all aspects of a standard conduit installation method. We have also given
Cable Tray Inspection & Testing Form
Method statement template is a document which anybody can use for creating the method statement from scratch. A good method statement template may elaborate some examples in order to easily understand the intention of the sections of the document. On this page
Ducts in any HVAC system are used for distribution of air which can be cooled, fresh or exhaust purpose. Commonly the HVAC ductwork is fabricated using GI sheets. There are heaps of different types of air conditioning HVAC duct available on the