Below is a brief method statement for road markings and road signs. The method will ensure the quality of work in accordance with the contract requirements and applicable local standards. Following this road work method statement will also ensure that all quality assurance/ control activities are happening in a systematic manner. Arrange following materials and […]
Road Markings & Markers Method Statement Read More »
Roadworks
This roadwork method statement describes work methodology for road construction covering the activities from subgrade to asphalt work. All personnel working at site shall have full knowledge and expertise in the excavation, backfilling, compaction and road testing process. Occupational health and safety program shall be properly communicated and implemented. Everyone should be aware of the
Method Statement for Road Construction Read More »
Roadworks
Below is a precise roadwork method statement that covers construction of embankment including soil stabilization and sub base preparation, with material obtained from approved borrow areas or suitable material obtained from roadway excavation and drain excavation etc. The embankment construction work shall be preformed in compliance with, contract agreement, Ministry of Road Transport & Highway
Below road works method statement covers the construction of Dry Lean Cement concrete sub-base for cement concrete pavement in accordance with requirement of roadwork specifications in conformity with the lines, grades and cross sections shown on the drawings and or as directed by the consulting engineer. The road construction shall be done in compliance with
Method Statement for Dry Lean Concrete – Roadworks Read More »
Civil Works Method Statements, Roadworks
This macadam work method statement covers laying and compacting clean, crushed, graded aggregate and granular materials premixed with water into a dense mass on a prepared Granular Sub base Course to specified lines, grades and cross sections as shown in drawings, subject to a minimum thickness of 75 mm and max. of 200 mm. References
Method Statement for Wet Mix Macadam (WMM) on Granular Sub Base Read More »
Civil Works Method Statements, Roadworks
The purpose of this procedure is to safely recover mobile equipment that may have been bogged, overturned, suffering from mechanical/structural failure, slipped over an edge or into a culvert, or similarly immobilized. It provides instruction for recovery operations that require the use of heavy mobile recovery equipment, although some of the general safety principles may
Mobile Heavy Equipment Recovery Standard Procedure Read More »
Civil Works Method Statements, Roadworks
Below is a sample checklist for inspection of road works which you can use for doing the inspection of road works. Stage of work/Item Technical Parameters to be checked / ensured As per estimate At Site       Geometrics (verify irrespective of stage of work) To check and ensure the following
Sample Checklist for Inspection of Road works Read More »
Roadworks