Construction Documentation Portal
Before the installation of standby generator the equipment shall be inspected and checked against the relevant general arrangement drawing, approved material submittal. Doors and Panels shall be checked to ensure proper opening and closes. Generator rating, name plate details, Breaker ratings, protection
Following tools shall be arranged before start of work. Measuring Tape Pen/Pencil Spanner Masking Tape Allen Key Health & Safety Requirements Keep Hands Away At The Time Of Clamping And Crimping. Use Right Tool For Adjusting The Level. Gloves, Safety Glasses &
In addition to the basic project environmental health and safety management organization structure, the organization can setup an independent project safety committee to carry out the following functions: Discuss safety policies and recommend adoption of these by management. Identify unsafe conditions and
No: ACTIVITY HAZARD CAUSES OF HAZARD CONSEQUENCES/ IMPACT RISK EVALUATION RISK LEVEL IMPLEMENTED CONTROL MEASURES RESIDUAL RISK ACCEPT Y/N? P S H/M/L P S H/M/L 1 Mobilization/Delivery of materials, tools and equipments at site Fall of materials and tools Manual
Ensure the machine is clean Fix Work piece with stopper. Fix Work piece using bench vice. Do not put your fingers inside the machine while fixing the work piece. Switch on machine. Press START button. Change the mode (Automatic/Manual). If it is
According to WHO, quality assurance is a wide- ranging concept covering all matters that individually or collectively influence the quality of a product or service. That is the reason the term total quality management was adopted in most of the organizations. With
Establishment of objectives and targets is very important for the success of environmental health and safety management system. Different organizations adopt approaches that suite their needs and organizational structure. But ultimate goal is to achieve best results and save some money that
At project level risk management plan ensures that HSE Risks are always identified and reviewed prior to the commencement of the site works. This is common practice as part of the project risk management process. During that process of risk assessment it