Procedure For Liter Weight of Clinker The liter weight of clinker is a good measure of burn-ability by calculating the density of the clinker.  The size of clinker for liter weight is between 5 & 10 mm. A clinker of density approximately 1100 g/ltr is of normal quality, but below than that is not considered a good […]
Standing Procedure For Liter Weight of Cement Clinker Read More »
Technical Articles
Diaphragm & Guide Walls Requirements The design and construction of the diaphragm wall including all its associated works such as guide walls, anchors, etc., shall be the responsibility of the Contractor and shall take into account the actual site, ground conditions, the equipment to be used and the local authorities requirements/regulations. The design and construction of
Earth Retention Shoring System for Excavations – Part 2 of 2 Read More »
Civil Works Method Statements, Technical Articles
The work specified herein includes the design, documentation, furnishing, and installation of earth retention systems for excavations. The earth retention system shall be either singular or multiple stages comprised of soldier piles and laggings, sheet pile wall and bracing, raker or timber sheet pile wall bracing or secant piling bracing and tie-back systems or cantilever
Earth Retention Shoring System for Excavations – Part 1 of 2 Read More »
Civil Works Method Statements, Technical Articles
Risk management as understood by its name is process of managing the risks, that involves first identify, assess and prioritize the risks and then implement the coordinated measures and/or resources to eliminate, minimize and monitor the probability and impact of the unwanted events or situations. Risk management is the identification, evaluation, and prioritization of risks (defined in ISO 31000 as the
Risk Management Principles Simple & Precise Explanation Read More »
Occupational Health and Safety, Risk Assessment, Technical Articles
Below we have given around 70 questions and answers that can be helpful for mechanical engineer interview. Q.1) What is the Unit of Heat? Units: BTU (British Thermal Units) 1BTU: It is the amount of energy required to raise 1 Degree Fahrenheit temperature of 1 Pound of water (OR) It is the amount of heat
Mechanical Engineering Interview Questions and Answers Read More »
HVAC Method Statements, Technical Articles
A ladder is a simple, versatile and relatively inexpensive piece of equipment to use on a construction project or at home level. The temptation therefore is to use it for all sorts or work without considering whether the risk warrants an alternative method of work before it is used for this purpose. However, the circumstances
Step Ladder Safety Procedure & Control Measures for Safe Work Read More »
Occupational Health and Safety, Risk Assessment, Technical Articles
The purpose of this standard HSE procedure is to provide guidance on the safe operation and use of abrasive wheels used as high speed power tools for grinding and cutting operations on the construction sites or in the offices and house hold. Project management including project manager, HSE manager and discipline engineers are responsible for
Safe Operation of Abrasive Wheels / Power Tools For Cutting & Grinding Read More »
Occupational Health and Safety, Risk Assessment, Technical Articles