Construction Documentation Portal
QHSE policy is a top level document that reflects the commitment of top management of a company to its intention of implementing the measures for achieving the quality and HSE targets and objectives. Above the policy there are two more documents which
Below procedure will help you to establish a safe standard for the installation of temporary and permanent electrical fixtures/appliances on project sites. Overhead Cables: Overhead supply from the supply point or metering point to the distribution boards on the site should be of
On this page we can learn three different soil compaction test methods that are specified in BS 1377. Soil compaction is very important step for any structure because if compaction is not done properly. After the soil compaction is complete a sample
The purpose of this procedure is to identify the key elements which need to be considered when setting up a new construction site and implementing the administrative arrangements for the start up of any project. Prior to commencement on site due consideration
PURPOSE This Method Statement describes the construction process of 1500 mm diameter Plunge columns construction in the project. SCOPE OF WORK The scope of work and the construction sequence for installation of permanent plunge column shall be as mentioned below: Traffic Management
The term QHSE is used as abbreviation of Quality, Health, Safety and Environment in most parts of the world. Sometimes environment is replaced by environmental. These four components combine together to form an integrated corporate management approach and according to this approach all workplace accidents
This method statement introduces the proposed activities to be undertaken and acts as a general methodology for traffic diversion during road construction in the project site. This has been prepared to identify the work stages and the construction methodology for ensuring the
Project job descriptions for different job titles are prepared and implemented as part of a good quality management system. Before start of a project normally organization chart is prepared and submitted for the approval of the client and consultant. Some clients provide