This procedure describes the requirements on the forward planning for the completion of a project to ensure that a coherent completion plan is...
Month: December 2018
MCQ’s Related to Instrumentation
1. Design and Selection of Process Control & Instrumentation System should include: Suitability, Reliability, Quality, Accuracy, and...
Method Statement Irrigation Systems Piping
Only approved material shall be used. Delivered material shall be stored at stores and shall always be subject to client’s representative...
Epoxy Painting Method
The aim of this Method Statement is to provide and maintain effective quality control procedures and to execute the work in compliance to standard...
90 or 45 Degree Elbow Trimming Calculation & Formula
In Piping design, sometimes you may have to trim the standard elbow into nonstandard trimmed elbow. This will result additional work and cost to the...
ISO 9001 Quality Management System
ISO 9001 is a quality management system standard that tells us about the requirements for implementing a successful quality management system.
The...
Vertical Turbine Firefighting Pump Installation
Dear engineers we are giving below a complete method statement that can be helpful for the installation of vertical turbine firefighting pump for...
Inspection and Quality Control Questionnaires
Q. What is QA/QC?
QA/QC means, “Quality Assurance/Quality Control” the purpose of this (QA/QC) is to establish the sequence of requirement for...
Sample Quality, Health, Safety and Environmental QHSE Policy
QHSE policy is a top level document that reflects the commitment of top management of a company to its intention of implementing the measures for...
Temporary Electrical Supply HSE Procedure For Construction Site
Below procedure will help you to establish a safe standard for the installation of temporary and permanent electrical fixtures/appliances on project...
Soil Compaction Test Methods as per BS 1377
On this page we can learn three different soil compaction test methods that are specified in BS 1377. Soil compaction is very important step for any...
Parapet Construction Method Statement
1. Scope
This method statement is developed and issued to describe the procedure for parapet construction works to ensure that the work is...
Health Safety Environment HSE Construction Site Establishment Procedure
The purpose of this procedure is to identify the key elements which need to be considered when setting up a new construction site and implementing...
Plunge Column Construction Method Statement
PURPOSE
This Method Statement describes the construction process of 1500 mm diameter Plunge columns construction in the project.
SCOPE OF...
Quality, Health, Safety and Environment QHSE Explained
The term QHSE is used as abbreviation of Quality, Health, Safety and Environment in most parts of the world. Sometimes environment is replaced by...