If you are willing to prepare risk assessment for your company work then this is right place to learn the risk assessment process. You will learn...
Month: November 2018
Standard Termite Control, Treatment and Application Requirements
This document covers termite control using approved insecticides executed in accordance with all applicable regulations in force in the country of...
HSE Engineer’s Typical Job Description
The role of HSE engineer is very important for any organization. First of all the selection of HSE engineer is done based on industry requirements...
Pebble Wash Do It Yourself
There are many advantages of doing the pebble wash i.e. it is natural material, thus soothing to your eyes. It will not fade and no need to apply...
What is COSHH?
COSHH stands for Control of Substances Hazardous to Health. The term itself clarifies that it talks about the hazardous materials. There is an old...
Earth Retention Shoring System for Excavations – Part 2 of 2
Diaphragm & Guide Walls Requirements
The design and construction of the diaphragm wall including all its associated works such as guide...
Earth Retention Shoring System for Excavations – Part 1 of 2
The work specified herein includes the design, documentation, furnishing, and installation of earth retention systems for excavations. The earth...
HIRA Hazard Identification & Risk Assessment
We have already learned about the risk and hazard. We came across the terms high risk and low risk.
The process of identifying the hazards and...
Metal Roofing & Sheet Metal Wall Cladding Standard Requirements
The work covered by this document includes the workmanship, equipment, supplies and materials and in performing all operations associated with metal...
Health and Safety Risk Assessment Definition & Example
Please read carefully if you really want to understand the definition of risk and risk assessment.
The word risk is very common for all of us and...
Cost Of Quality Estimation & Reporting Procedure
Cost of quality is one aspect of any process or project that is always under estimated. The cost of poor quality sometimes puts a company at the...
QHSE Meaning and Evolution of Quality, Health, Safety and Environmental Management Systems
QHSE is the term famous for the two professions collectively and in fact for four areas or roles i.e. Quality, Health, Safety and Environment or...
Method Statement for Oil Storage Tanks Calibration
Tank Calibration is the process of determining the volumetric content of a tank per unit height of liquid. This procedure shall be intended for...
Hydro and Water Fill Up Test for Settling Tanks
This test procedure shall be carried out to detect the leak in shell weld joints and to observe the load stabilization of liquid in interval level...