Construction Documentation Portal
CCTV Camera system or closed circuit television system is the use of video cameras to transmit a signal to a specific, limited set of monitors and at the same time recording and storing the acquired video streams. It differs from broadcasting on
Water filter is used for the removal of suspended particles from the water in order to make it usable or drinkable as well. The major function of a water filter is to pass the water through it and stop the impurities inside
General Requirements Batteries, fuel & auxiliary power must be isolated before carrying out initial inspection. Ensure that the control switch is in the OFF position and emergency switch is pressed. Ensure that the panel has the correct fascia and labels. Note: All test
Before reading more about civil engineering let’s first talk a little about what is Engineering? The word engineer originates from the Latin term ingenerare that means to invent, to create or to regulate. So in summary we can define engineering the professional
Before going to the welding procedure in full detail let’s first understand what is welding? The term welding is used in mechanical engineering when we are joining two or more pieces of any material typically metal by application of heat, pressure or
This welding procedure or Method statement describes in detail the welding process for pipe work and the welder’s qualification test procedures. This includes addressing programs for implementing commitments regarding the quality of welding works. Scope and Purpose This document outlines the method for executing
Below we have given few guidelines for electrical testing which can help electrical engineers & electrician to understand what are general requirements for doing the testing & commissioning of electrical systems at any kind of project or facility. All electrical plants &
All cables and termination hardware shall be 100% tested for defects in installation and to verify structured cabling system performance under installed conditions according to the requirements of ANSI/TIA 1152, ANSI/TIA-568 C.2 and IS&T. All pairs of each installed cable shall be