During an interview interviewer asks you about quality assurance and quality control. It makes you confused, now you are trying to explain but not able to satisfy the opposite side of the table. This single question may decide about your understanding of quality and its basic concepts. Hence may lead the decision maker to put […]
What is Quality Assurance? [Answered] Read More »
Quality Management, Technical Articles
Non conformity is always a major concern for any quality engineer/manager. There are incidents when companies handling the big clients faced big problems in closing the projects due to large number of NCR’s. Non conformance meaning are very broad in terms of the client requirements, but generally non conformity occurs whenever we deviate from the
Non Conformity Non Conformance & Corrective Action Procedure Read More »
Quality Management, Technical Articles
On this page you can find typical project organization chart and job descriptions of the project team. The job descriptions include: Project Manager Senior Project Engineer Architectural Coordination Engineer Planning Engineer Quantity Surveyor Safety Officer Quality Control Engineer Structural Engineer Civil Engineer Land Surveyor General Foreman Electrical Engineer Mechanical Engineer Understanding the job description in
Construction Project Job Descriptions & Organization Chart Read More »
Civil Engineering Methods, Quality Management, Templates
This method is applicable for all fixed, transportable and mobile machinery and equipment used in the building, construction and earthworks activities of the company. Where plant resource is required on the projects, plant department will be contacted to provide equipment or services. At each project site, project plant coordinator shall ensure that processes are in
Plant Machinery Management & Maintenance Procedure Read More »
Civil Engineering Methods, Quality Management
This procedure describes the requirements on the forward planning for the completion of a project to ensure that a coherent completion plan is developed well in advance of the end of a project. This then ensures that all activities associated with the completion of a project can start at an optimum time and in a
Project Completion Plan Preparation Procedure Read More »
Quality Management, Templates
1. Design and Selection of Process Control & Instrumentation System should include: Suitability, Reliability, Quality, Accuracy, and Repeatability. a) True b) False c) None 2. Sour Gas can be used in lieu of Instrument Air. a) True b) False c) None 3. Accepted Field Signals are: a) 3 – 15 psi, 4 – 20 mA,
MCQ’s Related to Instrumentation Read More »
Quality Management, Technical Articles
In Piping design, sometimes you may have to trim the standard elbow into nonstandard trimmed elbow. This will result additional work and cost to the project. Normally Piping Designers will avoid and should avoid this situation. But if it is unavoidable or the designer thinks that to make the orthographic angle it may require more
90 or 45 Degree Elbow Trimming Calculation & Formula Read More »
Quality Management, Technical Articles
ISO 9001 is a quality management system standard that tells us about the requirements for implementing a successful quality management system. The standard is published by International Organization For Standardization i.e. ISO. If a company is willing to establish a standardized quality system in their processes they can follow the requirements of the ISO 9001:2015
ISO 9001 Quality Management System Read More »
Quality Management, Technical Articles