Construction Documentation Portal
Building management system or BMS is the most important part of modern building projects. It covers the operation, security and safety of both the infrastructure and the tenants of any smart building.
This section gives you the access to all useful technical documents, forms and reports that can help you understand and implement a good building management system.
The design of the BMS shall be capable of providing a range of user interfaces including the main server and client computers. All communications between the user and the system shall be in clear language, without reference to special code or codes. It
The programmable controllers shall be 16bit type or more of the fully intelligent type, capable of performing all Control and Energy Management functions assigned to them, independent of any other BMS equipment. Programmable controllers may be of modular or fixed hardware construction
ACCEPTABLE BID PROCEDURES FOR BMS SYSTEM It is the intent of this specification to define a state-of-the-art distributed computerized software Integrated Building Management and Control System which is user friendly, has known reliability, is extremely responsive, and which is to be designed,
Below sequence of operation is for single zone Variable Volume type recirculating Air Handling Units AHU’s. The system shall be variable volume package Fresh Air Handling Unit. The covering of the sequence shall consist of: Supply Side coverage of scope Intake motorized damper Panel
Below is given the sequence of operation for Sump Pump Sets Sump Pump sets will be monitored by the BMS to provide the following information for smooth operation and monitoring of the pump operation. Each pump will have its Run & Trip
Sequence Of Operation for Domestic Water Filtration System Booster Pumps Circulations Pumps copper silver Ionization, Plate heat exchangers. Copper Silver Ionization Disinfectant Units Disinfection process using copper silver ionization shall be monitored by the BMS to provide the following information. The system
Sequence Of Operation for Chilled Water Pumps, Pressurization Units & Chemical Treatment System Primary/Secondary Chilled Water Pumps The secondary chilled water pump (SCHWP) sets will be controlled through VFD drives to maintain the desired system differential pressure. A minimum of 3 differential
Closed Control Unit (CCU) Sequence Of Operation The server rooms shall be provided with DX type Close Control Units. The system shall be constant volume package Close Control Unit (CCU). Electrical Rooms, IDF, MDF Rooms etc The unit shall consist of: Panel