Station No.
Valve
Size of Valve
Controller's Program
flow in lps
Duration (min)
Total flow as
per...
Latest additions !
Pressure Vessel Calculations
Pressure Vessel is briefly is a storage device, which could store fluids above 15PSI.
These are generally designed based on ASME codes, if vessel...
Construction Project Job Descriptions & Organization Chart
On this page you can find typical project organization chart and job descriptions of the project team.
The job descriptions include:
Project...
Soft landscaping method statement
This method statement describes the procedures for Soft landscaping works which includes planting media, & Planting.
Following...
Plant Machinery Management & Maintenance Procedure
This method is applicable for all fixed, transportable and mobile machinery and equipment used in the building, construction and earthworks...
Project Completion Plan Preparation Procedure
This procedure describes the requirements on the forward planning for the completion of a project to ensure that a coherent completion plan is...
MCQ’s Related to Instrumentation
1. Design and Selection of Process Control & Instrumentation System should include: Suitability, Reliability, Quality, Accuracy, and...
Method Statement Irrigation Systems Piping
Only approved material shall be used. Delivered material shall be stored at stores and shall always be subject to client’s representative...
Epoxy Painting Method
The aim of this Method Statement is to provide and maintain effective quality control procedures and to execute the work in compliance to standard...
90 or 45 Degree Elbow Trimming Calculation & Formula
In Piping design, sometimes you may have to trim the standard elbow into nonstandard trimmed elbow. This will result additional work and cost to the...
ISO 9001 Quality Management System
ISO 9001 is a quality management system standard that tells us about the requirements for implementing a successful quality management system.
The...
Vertical Turbine Firefighting Pump Installation
Dear engineers we are giving below a complete method statement that can be helpful for the installation of vertical turbine firefighting pump for...
Inspection and Quality Control Questionnaires
Q. What is QA/QC?
QA/QC means, “Quality Assurance/Quality Control” the purpose of this (QA/QC) is to establish the sequence of requirement for...
Sample Quality, Health, Safety and Environmental QHSE Policy
QHSE policy is a top level document that reflects the commitment of top management of a company to its intention of implementing the measures for...
Temporary Electrical Supply HSE Procedure For Construction Site
Below procedure will help you to establish a safe standard for the installation of temporary and permanent electrical fixtures/appliances on project...