This procedure describes the requirements on the forward planning for the completion of a project to ensure that a coherent completion plan is developed well in advance of the end of a project. This then ensures that all activities associated with the completion of a project can start at an optimum time and in a… Read More »
1. Design and Selection of Process Control & Instrumentation System should include: Suitability, Reliability, Quality, Accuracy, and Repeatability. a) True b) False c) None 2. Sour Gas can be used in lieu of Instrument Air. a) True b) False c) None 3. Accepted Field Signals are: a) 3 – 15 psi, 4 – 20 mA,… Read More »
Only approved material shall be used. Delivered material shall be stored at stores and shall always be subject to client’s representative inspection. Special shaded pipe racks shall be constructed to store pipes. Fittings and irrigation materials shall be stored inside containers that will be kept closed at all times. Transportation: All materials will be transported to… Read More »
The aim of this Method Statement is to provide and maintain effective quality control procedures and to execute the work in compliance to standard and good practice at all stages during the execution of Epoxy Painting Works at project site. The equipment/tools involved in painting works are listed below. Paint Brushes/Roller Paint Sprayers as required… Read More »
In Piping design, sometimes you may have to trim the standard elbow into nonstandard trimmed elbow. This will result additional work and cost to the project. Normally Piping Designers will avoid and should avoid this situation. But if it is unavoidable or the designer thinks that to make the orthographic angle it may require more… Read More »
ISO 9001 is a quality management system standard that tells us about the requirements for implementing a successful quality management system. The standard is published by International Organization For Standardization i.e. ISO. If a company is willing to establish a standardized quality system in their processes they can follow the requirements of the ISO 9001:2015… Read More »
Dear engineers we are giving below a complete method statement that can be helpful for the installation of vertical turbine firefighting pump for any project. Before start of the work ensure that all latest approved related documents like drawings are available for reference. All installation at site shall be based on approved shop drawings, specifications,… Read More »
Q. What is QA/QC? QA/QC means, “Quality Assurance/Quality Control” the purpose of this (QA/QC) is to establish the sequence of requirement for the quality of material, quality of works, its inspection and records. Q. What are basic responsibilities of QA/QC personals? To ensure execution of works and comply fully as per standard and approved specs.… Read More »