This test procedure shall be carried out to detect the leak in shell weld joints and to observe the load stabilization of liquid in interval level height. During the hydro test, all instrumentation shall be excluded to avoid the damage to instruments. Since the hydro test is to be carried out by produced water, ensure […]
Hydro and Water Fill Up Test for Settling Tanks Read More »
Civil Engineering Methods, Method Statement for Civil Works
1. Purpose The purpose of this project management procedure is to ensure that prior to submitting a Tender the proposed terms and conditions are appropriately reviewed in order to: – gain an overall appreciation of the risk profile of the proposed contract – identify any specific provisions which may be unacceptable to COMPANY and that will require
Project Construction Contract Review Procedure Read More »
Quality Management
Following Plant & Equipment to be arranged for the project fencing work. Tracked excavator Tractor and trailer Post driver Chainsaw Small tools (hammers, nail guns, wire cutters etc.) All personnel entering the site shall have received site safety induction and have attended a job toolbox talk. The Fencing Site Engineer will issue a Permit to Dig
Method Statement for Installation of Fencing Read More »
Civil Engineering Methods, Method Statement for Civil WorksThe spool fabrication will be implemented with the sequence of marking, cutting, fit-up, welding, and painting. Marking All materials shall be marked for identification and traceability with respect to installation area, sheet number and spool number. The cut pipe spools shall be marked with their respective spool numbers, in accordance with the marked up fabrication
Method Statement For Spool Fabrication Of Steel Piping Read More »
Method Statements
Excavation and Backfilling for Culverts, Storm Sewers and Ducts Precast concrete and steel pipe culverts and pipe ducts will be installed in trenches cut into previously constructed and compacted embankment either from the subgrade or from an embankment height at least twice the nominal diameter of the pipe. Unless otherwise noted on the drawings, trenches
Method Of Statement For Structural Excavation & Backfilling Read More »
Civil Engineering Methods, Method Statement for Civil Works, Method Statements
Measurement of Structural excavation will be limited to excavation for foundation for bridges, retaining walls, box culverts or cross sectional area exceeding 1 sq. mtr, box culvert wing walls, head walls, toe walls and aprons, manholes, pump houses and sub-stations. For box culverts 1 sq. mtr or less, pipe culverts, storm sewers and ducts, measurement
Method of Measurement for Structural Excavations Read More »
Civil Engineering Methods
Before start of work, following equipment and machinery shall be arranged for earthwork and monitoring. Excavators Dump Trucks Bull Dozers Compactor Rollers Settlement Gauges/Settlement Markers Survey Equipment To begin with, licensed surveyor is required to establish the boundary and the temporary bench mark and existing ground level (EGL) all these have to be confirmed by
Method Statement for Earthwork Related to Track Work Read More »
Civil Engineering Methods, Construction Method Statements, Method Statement for Civil Works, Method Statements
Project starts from project mobilization. Once you win the project and client asks you to move your team you need certain documents for submission and approval. Site mobilization method statement is one of such requirement. Now a days most of the government entities require that all contractors must submit a plan which details how mobilization
Construction Project Site Mobilization Method Statement Read More »
Civil Engineering Methods, Construction Method Statements, Method Statement for Civil Works, Method Statements