Installation Method Statement For Kitchen Exhaust Ducting Works

1. PURPOSE: This method statement covers on site installation of pre-fabricated ductwork systems for kitchen exhaust. 2. SCOPE OF WORK: This procedure is to define the method to be used to ensure that prefabricated ducting, bracketing, in line equipment installation, final connections and workmanship are correct and acceptable, and conforms to the contract documents and specifications. 3. RESPONSIBILITIES Construction Manager Mechanical HVAC Engineer/Supervisor …

Read More »

General Safety Requirements For Working On Height (Scaffolds & Ladders)

Maximum fall incidents take place due to improper use of scaffolds and ladders especially in construction industry. There are plenty of means used in construction sites for performing the work at height that include rigid stationary scaffolds, mobile tower scaffolds, mobile platforms, man-lifts and ladders etc. In ordered to ensure that all works that require working on height, takes place …

Read More »

fahu ahu Installation Method For Air Handling Units (AHU)

1. Purpose This method statement covers on site fahu and ahu installation and connection to piping and ducting for pre-assembled AHU’s i.e. Air-Handling Units. 2. Scope Of Work This procedure is applicable for the project to ensure that all Air Handling Units ahu installation, final connections and workmanship is correct and acceptable and conforms to the contract documents, specifications and manufacturer requirements …

Read More »

Chilled Water Pipe Insulation Method Statement

1. Purpose: This method statement covers on site installation of thermal insulation for the complete chilled water piping system. 2. Scope: This procedure is applicable for insulation of all supply and return mains, headers, branches, risers, drips, run-outs, pump suction and discharge, pipework, fittings, flanges, valves, expansion and movement devices, flexible connections associated with the chilled water piping system installation . 3. …

Read More »

Method Of Statement For Installation Of Domestic Hot & Cold Water Supply Copper Piping

SCOPE OF WORK This Method Statement describes the procedure for the installation of copper pipes for domestic water services (hot & cold) inside buildings for the XYZ project. PIPE STORAGE & HANDLING: All pipes shall be stored in proper storage conditions, which are free from dust, sunlight and extreme temperatures. For long-term storage, the pipes shall be stacked in racks …

Read More »

What Is A Method Of Statement?

What is a method statement? this is a question many people come across while they are working in the field of a process, manufacturing or construction. A method statement as its name implies is a step wise statement or method described to perform a certain activity or operation. Method of statement can be in the form of a flowchart or …

Read More »

Construction Method Statement For Installation of Chilled Water Piping System

1. PURPOSE: This method statement covers on site installation of pre-fabricated and site fabricated mild steel pipework – supports – expansion and anchor points for chilled water system. 2. SCOPE OF WORK: This procedure is to define the method used to ensure that the Chilled Water Pipework System comprising all pipes, tubes, valves, fittings, reducers, expanders, nipples, vents, bleed off, expansion and contraction …

Read More »