1. Purpose This method statement covers on site installation of noise control and vibration isolator equipment associated with all rotating, centrifugal and reciprocating equipment i.e. pumps, chillers, air handling units and pipe connections etc. 2. Scope of Work This procedure defines the stepwise method that will be used to ensure the correct installation of noise control… Read More »
Before commencing any activity on site, the consultants must be notified. All the related documents, shop drawings, method of statements, material approvals, subcontractor’s approvals and test certificates etc. must be approved and readily available. Below mentioned tools and equipment shall be arranged. Cutting Machine – LP32/TS20 Coring Machine – DD 200/DD 350 Hand tools General… Read More »
The purpose of this document is to lay down the systematic procedures for the various activities required for FORM WORKS to ensure that all works are carried out in accordance with the approved shop drawings and contract specifications. This civil method statement is a general outline for fabrication and use of formwork for any kind… Read More »
The objectives of the process of testing and commissioning of CCTV camera is to verify proper functioning of the equipments and system after installation, and to ensure the performance of the installed system meets the specified design intent through a series of tests and adjustments. Finally to capture and record performance data of the whole installation as the baseline for… Read More »
The purpose of this method statement is to provide guidelines and steps for the cctv installation of security systems by describing the Work to be executed, how it is to be executed and making references to other technical standards and relevant national/international standards and project quality plan and its aspects of the work to be… Read More »
Below is the method statement for the installation of fire alarm system which can be modified for different type of systems like HSSD or Vesda etc. The steps are very general and should be customized depending upon the project specific requirements, specifications and applicable NFPA or other standards. Installation Procedure All materials received at site… Read More »
Below is the brief Method Statement For Installation & Testing of Sanitary fittings / plumbing wares / Accessories / Plumbing Fixtures etc. This method of statement is very useful for any kind of construction project. The procedure is simple and covers all aspects of a good sanitary ware work. Below is the list of necessary… Read More »
Below is a precise air balancing procedure that covers the HVAC system equipment and ducting system. Air Balancing For Fan Coil Units Check that all automatic controls are fully commissioned and operating properly All pre-commissioning checks have been carried out Select the specified speed of the Fan Coil Set all the dampers in the grill… Read More »