Method Statement HQ Construction Method Statements & Documentation Portal

Construction Supervisors to ensure that all ductwork and insulation have been inspected and signed off by the client prior to the installation of diffusers, grilles and louvres to the HVAC ducting system. It is also responsibility of site engineer and supervisor to ensure plenum or terminal box openings are compatible …

Purpose & Scope Set out a clear and defined method of ensuring that the correct control valve is selected and installed in the correct position in the HVAC system. In addition a method is also set out which will ensure that the correct actuators for each specific control valve assembly are …

This method statement for installation of medium and low voltage switchgear and panels boards on site is prepared to define the method used to ensure that all MV/LV switch gear and panels site assembly, installation, final connection and workmanship is correct and acceptable and conforms to the contract documents & electrical …

This method statement covers on site installation of all condensate UPVC pipes for fan coils drains and galvanized pipework for AHU drains, including supports, expansion and anchor points for the condensate drainage system and insulation of the galvanized steel and  upvc pipework. This method statement defines the method that will …

1. PURPOSE This method statement is prepared in order to make sure that site installation of all types Fan Coil Units and Packaged Air Conditioning Units and associated refrigerant pipework is done as per applicable requirements and manufacturer instructions. 2. SCOPE OF WORK This procedure defines the method that will be …

Cleaning and flushing of chilled water piping system is very important part of any HVAC project. During installation there are many sources from which debris, dusts and even metallic parts enter the system. Before putting the system in operation cleaning and flushing is must. This ensures protection of involved machines …

Procedure For Liter Weight of Clinker The liter weight of clinker is a good measure of burn-ability by calculating the density of the clinker.  The size of clinker for liter weight is between 5 & 10 mm. A clinker of density approximately 1100 g/ltr is of normal quality, but below than that …

Method statement template is a document which anybody can use for creating the method statement from scratch. A good method statement template may elaborate some examples in order to easily understand the intention of the sections of the document. I am giving here a complete a thoroughly reviewed method statement …

1. Purpose: The purpose of this method statement is to make sure that Hydro-static pressure testing of chilled water piping system is done safely as per client requirements and applicable standards. 2. Scope Of Work: This method statement covers the Hydro-static testing of CHW pipework at the project and to be followed for all …