Templates - MethodStatementHQ

List Of Mandatory Tests For Transformers

August 5, 2015

The following routine tests specified in IEC726 shall be carried out at the manufacturer’s works on each and every transformer: a) Measurement of winding resistance b) Measurement of voltage ratio and check of vector relationship c) Measurement of impedance voltage (principal tapping), short circuit Impedance and load loss d) Measurement of no-load loss and current e) Separate […]

List Of Mandatory Tests For Transformers Read More »

List Of Common Tests For Diesel Generator Testing

August 5, 2015

The following site tests shall be carried out in order to determine whether the DG material and apparatus comply with the most specifications. Not less than seven days notice in writing shall be given to the Engineers in order that they may arrange to present if they so desire. The Contractors shall arrange to conduct as many tests

List Of Common Tests For Diesel Generator Testing Read More »

Final Distribution Boards Testing Report Checklist

March 17, 2015

The checklist or test report for mdb, smdb and fdb can be used for testing and commissioning purpose as per the below given template. There is one another page on our website that provides full list of applicable tests and respective method statement for LV Switchgear installation and testing of all components. You can download

Final Distribution Boards Testing Report Checklist Read More »

Templates, Test Reports & Forms

Testing & Commissioning Report SMDB

March 17, 2015

COMMISSIONING RECORD SHEET : SMDB Project: Panel Location: Panel Ref.: Sheet of Rev. CIRCUIT DETAILS COLD TEST LIVE TEST Circuit No. Circuit Designation Cable (mm2) ECC (mm2) No. of Cores MCCB Amps MCCB Type MCCB (kA) ELCB Rating Insulation Resistance (MΩ) Ring Zs act. (Ω) Energized (Date) ELCB (mS) R-Y R-B Y-B RYB-N RYB-E N-E

Testing & Commissioning Report SMDB Read More »

Templates, Test Reports & Forms

Continuity & Insulation Resistance Testing Report

March 17, 2015

INSTALLATION & TEST REPORT Project : Doc Ref No : Test Instrument (Serial NO.s) SCM Ref No : Tested By : Continuty tester : Fed From : Date : Insulation Tester : SCM Ref No Circuit Ref No Phase & Neutral Size (mm²) Circuit Name Contuinity Test (Ohms) Insulation resistance test (Mohms) polarity R1 +

Continuity & Insulation Resistance Testing Report Read More »

Templates, Test Reports & Forms

BATTERY AUTONOMY TEST REPORT FOR FIRE ALARM SYSTEM

March 17, 2015

BATTERY AUTONOMY TEST REPORT FOR FIRE ALARM SYSTEM PROJECT: CLIENT: CONSULTANT: MAINCONTRACTOR: MEP CONTRACTOR: SYETEM: FIRE ALARM SYSTEM TEST DATE: PANEL No: LOCATION: DURATION: 24 HRS BACK UP / 00.30 HRS BACK UP WITH SONDER ACTIVATION. BATTERY DISCHARGING S.NO TIME DC METERING VOLT AMP 1 2 3 4 5 6 7 8 9 10 11

BATTERY AUTONOMY TEST REPORT FOR FIRE ALARM SYSTEM Read More »

Templates, Test Reports & Forms

Testing & Commissioning Report For Fire Alarm System

March 17, 2015

Fire Alarm system includes Fire detection and alarm system. Manufacturer for the Fire Alarm system is Simplex -USA. Fire Alarm system devices are UL and ULC listed and meets NFPA 70, Article 250, NFPA 72, NFPA 780 & EN 60 8 49 standards. The Panel used is Simplex model 4100ES with processor capacity of 2500 points

Testing & Commissioning Report For Fire Alarm System Read More »

Templates, Test Reports & Forms, Testing & Commissioning