Web Master

Pile Cutting & Trimming Method Statement

The purpose of this Method Statement is to define the procedure for the cutting of piles to the approved cut off level. General sequence of work may include: Auger fitted with appropriate head Auger drilled into ground to required depth. Steel reinforcement cage lowered in the bore hole, with the upper lap length enclosed in […]

Pile Cutting & Trimming Method Statement Read More »

Civil Engineering Methods, Construction Method Statements, Method Statement for Civil Works
project approvals procedure for construction projects

Project Approvals – Statutory and Regulatory Requirements for Construction Projects

This procedure describes the requirements on statutory approvals to ensure all necessary regulatory and statutory project approvals are obtained in a timely manner to support engineering activities, construction activities and project completion etc. The process related to statutory/regulatory project approvals is described below, all parties shall  allocate sufficient cost, time and resources for this activity

Project Approvals – Statutory and Regulatory Requirements for Construction Projects Read More »

Project Planning, Quality Management

General Sequence of Works in Preparation of Building Foundation Up To The Level Of Blinding Concrete

The purpose of this article is to define the procedure for sequence of works in preparation for the foundation up to the level of blinding concrete, considering all safety and quality requirements. Preparation of foundation works at site involves water proofing, screed and casting of foundations including column and lift pit footings. Prior to commencement

General Sequence of Works in Preparation of Building Foundation Up To The Level Of Blinding Concrete Read More »

Civil Engineering Methods, Project Planning, Quality Management, Technical Articles
Possible Cause of Road Crack and Defect - Road Maintenance Inspection Guide

Possible Causes of Road Crack and Defect – Road Maintenance Inspection Guide

Below you can find some major causes of road crack and road defects. The page also provides what are the effects if these road defects are not properly addressed. Alligator Cracking Alligator cracking is a series of interconnecting cracks creating interconnected patterns on the road. The cracks start at the bottom of asphalt surface and

Possible Causes of Road Crack and Defect – Road Maintenance Inspection Guide Read More »

Civil Engineering Methods, Roadworks
Steel Structure Building Construction Procedure

Steel Structure Building Construction Procedure

This procedure is useful for building construction based upon the steel structure erection work. Based on the design and specification, this document provides a proper step wise procedure and quality and safety management of the steel structure work. The following items/equipments are basic requirements  for building construction of steel structure works at a large scale

Steel Structure Building Construction Procedure Read More »

Construction Method Statements, Stainless Steel Fabrication
Road Pavement Construction Inspection Checklist

Road Pavement Construction Inspection Checklist

General road construction site inspection checks: Contractor has all necessary permits to work in road where applicable, i.e. Construction Permit, Insurance, Bonding etc. available. Safety to public considered: (barricades, covered walkways, etc. provided) Barricades available around excavations in street. Barricades available around stockpiled materials in street. Adequate detour signs to get the public through or

Road Pavement Construction Inspection Checklist Read More »

Roadworks
Aluminium Cutter Machine Operation Work Instructions

Aluminium Cutter Machine Operation Work Instructions

This page provides you steps for using the aluminium cutter machine. The instructions are explained using the images to understand easily. When cutting aluminium profiles, please wear hand gloves, ear muffs and safety glasses. Do not wear any kind of jewelry (rings, watches, bracelets etc.) in order to prevent scratching the aluminum end products and

Aluminium Cutter Machine Operation Work Instructions Read More »

Aluminium & Glass Work Methods
error: Content is protected !!
Scroll to Top