Method Statement for Internal Painting

1. Purpose The purpose of this method statement is to define the standard procedure for carrying out internal painting works for walls, ceilings, columns, soffits, gypsum board surfaces, plastered surfaces, concrete surfaces, and other internal architectural elements in accordance with project specifications, approved material submittals, manufacturer recommendations, and applicable quality standards. This method statement ensures […]

Method Statement for Internal Painting Read More »

Method Statement for Civil Works
standby diesel generator installation instruction

Standby Diesel Generator Installation Instructions

Before the installation of standby generator the equipment shall be inspected and checked against the relevant general arrangement drawing, approved material submittal. Doors and Panels shall be checked to ensure proper opening and closes. Generator rating, name plate details, Breaker ratings, protection devices, indicators, voltmeter and ammeters shall be checked. The Presence of all identifying

Standby Diesel Generator Installation Instructions Read More »

Electrical Method Statements

Water Supply Piping Installation Method Statement – HDPE, uPVC, Copper & PPR Pipes

This plumbing method of statement covers the installation of domestic water supply piping and accessories. The procedure defines the method to ensure the installation work is done as per contract requirements, specifications and best practices. It gives details of how to carry out the work and what health and safety issues and controls are necessary.

Water Supply Piping Installation Method Statement – HDPE, uPVC, Copper & PPR Pipes Read More »

Plumbing Method Statements
BACnet Protocol for BMS

Integration & Interface of BMS System with Other Services

The system shall be capable of integration with other building services level by simple hardware (electrical) methods or by the use of a computer-based communications protocol. Where a communications protocol is used, integration controllers shall provide this facility and shall be capable of integrating with systems such as fire, security, lifts, lights, etc. The integrity

Integration & Interface of BMS System with Other Services Read More »

Building Management System
Method Statement for Fire Fighting System Installation Testing & Flushing

Method Statement for Fire Protection System Testing and Commissioning

Fire protection system is useful for protecting the property in the case of fire breakout. In this system there are many fire protection equipment involving fire extinguisher, fire sprinkler, fire hose reel and hydrants etc. In addition to these equipment there are different controls that monitor the whole system i.e. fire alarm system, valves and

Method Statement for Fire Protection System Testing and Commissioning Read More »

Method Statements, Testing & Commissioning
PVC Pipe & Conduit Installation

Method Statement for PVC Electrical Conduit – PVC Pipe Installation

Plastic electrical pvc conduits are common item which is useful for electrical wiring using pvc pipe. Since these electrical conduits are not much stronger as compared to metallic GI conduits therefore need proper handling and storage. Plastic electrical conduit pipes while unloading shall be lowered properly, not dropped to the ground. While during the storage,

Method Statement for PVC Electrical Conduit – PVC Pipe Installation Read More »

Electrical Method Statements
Construction worker in safety vest and helmet painting interior wall with roller

Painting Method Statement – Berger Emulsion

The method statement outlines procedures for internal painting projects using Berger paints, detailing surface preparation, application, and cleanup. It specifies sequences for Latex Emulsion and Enamel paints, necessary tools, and safety precautions. Proper storage, mixing, and application techniques are emphasized to ensure quality results. Drying times vary based on temperature and humidity. This method statement

Painting Method Statement – Berger Emulsion Read More »

Method Statement for Civil Works

Lead Acid Batteries Installation Operation & Maintenance

Before starting the batteries installation begins, inspect for signs of damage or missing components. Store the battery in a dry, clean and preferably cool and frost-free location. Do not expose the cells to direct sunlight as damage to the container and cover may occur. As the batteries are supplied charged, storage time is limited. In

Lead Acid Batteries Installation Operation & Maintenance Read More »

Construction Method Statements, Electrical Method Statements, Method Statements, Testing & Commissioning
split unit ac testing and commissioning

Split Unit Testing and Commissioning Method Statement

Below is a precise HVAC method statement that briefly explains testing and commissioning of split unit ac air conditioner. The test will be commenced after Split Unit installation and power supply panel T&C activities completed. All areas and fan inlet & outlet should be cleared of waste materials and any other obstruction. The purpose of

Split Unit Testing and Commissioning Method Statement Read More »

HVAC Method Statements, Testing & Commissioning
error: Content is protected !!
Scroll to Top