Below is a sample checklist for inspection of road works which you can use for doing the inspection of road works. Stage of work/Item Technical Parameters to be checked / ensured As per estimate At Site Geometrics (verify irrespective of stage of work) To check and ensure the following […]
Sample Checklist for Inspection of Road works Read More »
RoadworksGeneral road construction site inspection checks: Contractor has all necessary permits to work in road where applicable, i.e. Construction Permit, Insurance, Bonding etc. available. Safety to public considered: (barricades, covered walkways, etc. provided) Barricades available around excavations in street. Barricades available around stockpiled materials in street. Adequate detour signs to get the public through or
Road Pavement Construction Inspection Checklist Read More »
Roadworks
This page provides you steps for using the aluminium cutter machine. The instructions are explained using the images to understand easily. When cutting aluminium profiles, please wear hand gloves, ear muffs and safety glasses. Do not wear any kind of jewelry (rings, watches, bracelets etc.) in order to prevent scratching the aluminum end products and
Aluminium Cutter Machine Operation Work Instructions Read More »
Aluminium & Glass Work Methods
This procedure describes the requirements on the control of engineering documents. This is an essential document control procedure that ensures all engineering drawings and related technical documents essential for completing the works, including shop drawings by vendors, manufacturers and subcontractors on Projects are duly registered, reviewed, approved and distributed in a controlled manner. Procedure of
Control of Engineering Documents Procedure for Quality Management System Read More »
Quality Management, Technical Articles, Templates
This lock out tag out procedure shall help companies to establish a standard for the safe isolation of machinery, equipment and any other energy source which may need isolation by means of a lock-out tag-out LOTO system. Overall the project head / project manager is responsible for the implementation of this standard hse procedure as
Lock Out Tag Out LOTO Construction Safety Isolation Procedure Read More »
Occupational Health and Safety, Technical Articles
Below is step wise method for fabrication of aluminum curtain walls for aluminium fabrication work. If you work in an aluminum and glass factory then this work instruction will help you to achieve good quality aluminium work. Arrange following materials and tools before start of work. Drilling Machine, Screws & Drill Bit Knife Cutting Lists
Aluminium Fabrication Work Instruction for Curtain Walls Read More »
Aluminium & Glass Work Methods