All necessary clearing and grubbing and topsoil excavation (where necessary) will be completed prior to the beginning of the excavation. The location will be demarcated to show the limits and depths of the excavation. Disturbing and spoiling material and vegetation outside of the expropriation limits will be avoided to the extent possible. The excavation will […]
Structural Excavation and Backfill General Tips Read More »
Civil Engineering Methods
Diaphragm & Guide Walls Requirements The design and construction of the diaphragm wall including all its associated works such as guide walls, anchors, etc., shall be the responsibility of the Contractor and shall take into account the actual site, ground conditions, the equipment to be used and the local authorities requirements/regulations. The design and construction of
Earth Retention Shoring System for Excavations – Part 2 of 2 Read More »
Civil Engineering Methods
The work specified herein includes the design, documentation, furnishing, and installation of earth retention systems for excavations. The earth retention system shall be either singular or multiple stages comprised of soldier piles and laggings, sheet pile wall and bracing, raker or timber sheet pile wall bracing or secant piling bracing and tie-back systems or cantilever
Earth Retention Shoring System for Excavations – Part 1 of 2 Read More »
Civil Engineering Methods, Technical Articles
Below is a detailed method statement for thermal insulation application on pipes, fittings and equipment connections. Calcium silicate insulation is used for thermal insulation of indoor piping and fittings. Perlite insulation is often used where water entering an insulation system may cause corrosion problems or process problems, for example the outdoor piping, fitting and equipment.
Method Statement for Installation of Thermal Insulation on Pipes Read More »
HVAC Method Statements, Method Statements
This method statement covers on site installation of pre-fabricated ductwork system for kitchen exhaust ducting. Procedure defines the method that will make sure that prefabricated kitchen exhaust ducting including support/bracketing, in line equipment installation and final connections are correct and acceptable, and conforms to the contract documents and specifications. Construction/ Project Manager is overall responsible
Kitchen Exhaust Ducting Installation Method Statement Read More »
HVAC Method Statements, Method Statements
Maximum fall incidents take place due to improper use of scaffolds and ladders especially in construction industry when people are working at height. There are plenty of means used in construction sites for performing the work at height that include rigid stationary scaffolds, mobile tower scaffolds, mobile platforms, man-lifts and ladders etc. In order to
HSE Safety Requirements for Working at Height (Scaffolds & Ladders) Read More »
Occupational Health and Safety, Risk Assessment
1.0 PURPOSE The purpose of generating this method statement is to define the procedure step by step to implement the correct practices for medium voltage switchgear panel installation & its accessories through the guidelines contained herein so as to ensure that the job execution complies with specifications and serves the intended function to satisfactory level.
Switchgear Installation Method Statement – MV LV HV Switchgear Panels Read More »
Electrical Method Statements
This page presents precise mechanical method statement that covers ahu testing and commissioning procedure. A full method statement shall have many other sections and details depending upon the type and size of units and projects. Prior to testing & commissioning ensure that all the sections of the Air Handling Units are thoroughly cleaned. In case
Method Statement for Testing & Commissioning of Air Handling Units AHU & FAHU Read More »
HVAC Method Statements, Method Statements, Testing & Commissioning