Below is the procedure for performing the sliding door/ aluminum door installation for any kind of building project.
Before start of the sliding doors installation work, make sure the approval of material submittal and subcontractor / supplier.
Ensure that shop drawings is complete and method of aluminium door fixation, details of aluminium units is approved by the consultant/client.
Verify the sizes of the aluminium profiles in the shop drawings are the same as per the material submittals approval.
Sliding doors installation should be done as per the manufacturer recommendations.
All materials to be delivered and be made available on site by the responsible contractor prior to technicians commencing the aluminium doors installation work.
Necessary Tools & Equipment for Aluminium Sliding Doors Installation
Following tools shall be arranged before starting the work onsite.
- Concrete Drill Machine
- Rechargeable Tighter machine
- Small cutting machine
- Tool Box
- Extension wire
- Line Dory
- Spirit level
- Plastic Hammer
- Metal Hammer
- Screw Driver Flat
- Screw Driver Star
- Round and flat file
- Chisel
- Right Angle
- Silicon gun
- Rivet gun
- Allen key
- Plier
- Vice grip
- Measurement tape
- Knife
- Spanner
The capacity / size of the above tools and equipment shall be judged in accordance with site conditions, requirements, and availability at the time of execution
Health and Safety Requirements
All the equipments, tools and tackles being used for the work should be in good working condition and maintained.
Personnel will be provided with toolbox talk on the procedures to execute the work safely.
All employees shall attend Safety Induction and training Course to identify all Hazards associated with this work.
The safety office of the site will be responsible for carrying risk assessment and record updated which can be inspected at site office.
All workers / field staff shall be provided with necessary PPE such as coverall, helmet, safety shoes, safety goggles, safety harness etc.
Aluminium Sliding Door Installation Procedure
Aluminium track profile will be cut to length and manually lifted into position on to a pre-prepared structure and secured via screw fixings.
All associated components will be then attached to this profile.
Door leaves with approved glass will be manually manipulated into place and secured to the track
Activation devices and programmer switches will be screwed fixed to the structure and wired back to the operator.
Any remote activation devices/Sensors will be installed with cabling having range of min 1 meter.
Electrical connection to the operator will be made by technicians using supplied cable (240V 13A) connecting to BMS/Fire fighting System for testing.
The spur should be provided to the left or right side at operator height.
Aluminium sliding doors to be set up according to their operating specification.
Discover more from Method Statement HQ
Subscribe to get the latest posts sent to your email.