Everything related to Occupational Health and Safety HSE is available for site safety officers, safety inspectors and safety engineers.
Other information which you can find from our articles include:
occupational safety and health administration
workplace safety
osha 1994
nfpa 1500
national institute for occupational safety and health
occupational safety and health standards
and many many more ….
Below are detailed health and safety procedures for GRP pipeline installation and lamination works. The chemical components required for the butt-strap joints of GRP pipes present certain safety and health hazards if not handled well. Following are the recommendations: Common Hazards: Resin: Liquid
The purpose of this method statement is to ensure pollution free environment by proper disposal of chemical waste that are hazardous to health of personnel. The procedure is applicable to all personnel involved in processing of photosensitive film and handling of chemicals.
This document is for the use of employees and its subcontractors, who are responsible in operations of instruments using ionising radiation. This document covers specific instructions on how to safely perform radiography related task. Please note that this method is general and
What is Safety Hazard? In the field of occupational health and safety the word hazard is a little bit difficult to understand and explain since it is mixed with other terms like danger and risk. We can define hazard as a cause
This safe work method statement outlines conventional safety requirements for erecting and dismantling the vertical concrete forming systems. However, equipment and forming systems differ for different manufacturers and suppliers. Therefore reference must always be made to the instructions and procedures of the
Below procedure will help you to establish a safe standard for the installation of temporary and permanent electrical fixtures/appliances on project sites. Overhead Cables: Overhead supply from the supply point or metering point to the distribution boards on the site should be of